Juergen Luenzer
Binsfelder Strasse 77
52351 Düren Phone: 024212084690
E-Mail: jluenzer@nippongenetics.de
Web: www.nippongenetics.eu

PCR cycler

Kyratec SuperCycler - efficient, intuitive, easy handling

Efficient, intuitive, easy to use: these are the three most common comments from users about the Kyratec SuperCycler.
The SuperCycler is characterized by a high performance active heating and cooling using quality 8-in Peltier elements, 4 high precision sensors and the latest control software. The block system is designed for the use of 96 individual PCR tubes (0.2 ml), 12 PCR 8-well strips (0.2 ml) or 96-well PCR plates (0.2 ml). SuperCycler combines the latest electronics and Peltier technology with unusually high operating comfort.

Powerful Thermal Engine
A precision composite alloy block with low mass and high thermal conductivity provides excellent ramp rates, long peltier life and low well to well temperature variation.
8 high quality peltier devices with 4 independent control systems and feedback sensors allow for high thermal uniformity across the block.

  

Heated Lid Evaporation Control
The SuperCycler employs an applied pressure heated lid design to keep the air contained within the tube hotter than the reaction volume. This causes any evaporation to condense
back into the cooler reaction liquid, thereby eliminating the need for an oil or wax condensation overlay.

Compact Footprint
Boasting a footprint of only 18 x 28.5 x 19 cm (W x D x H), the
SuperCycler is designed to save valuable bench space within
the laboratory.
Weighing in at just 5.5 kg, this machine is also highly portable
for the ever-changing laboratory environment.

  

Touch Screen Graphical User Interface
A high performance graphical processor with large 7 inch,
vivid color touch screen display allows for easy run setup and monitoring. The powerful yet intuitive software makes creation of even the most complex of thermal profiles a
breeze. Free software upgrades are provided on our website
keeping your instrument up to date with the latest features
and developments

  

USB Connectivity
A front USB port allows for fast, easy file transfer to USB
memory stick enabling the sharing of thermal profiles between instruments and users. The use of a USB mouse isalso supported.

 

Screenshots - how to use the SuperCycler
Screenshots - how to use the SuperCycler

Start screen
Load a saved profile from the internal memory or USB stick, or create a new profile, by using the
helpful Wizard assistant

Wizard Mode
The Wizard utility enables the user to configure easy to moderate complexity profiles in just moments. All the thermal steps which occur in a typical
profile are included and the parameters may be adjusted in just a few clicks.

Manual Mode
The Manual Profile editor is very helpful for the creation of even difficult profiles. The screen displays the current experiment profile in a ‘tree list’ format with a graphical representation of each thermal step.
You can add, modify or delete additional steps easily.

The User Accounts section
allows up to 99 user profiles each with dedicated file storage directory and personalised Icon. When a user is selected thermal profiles will be loaded or saved to a directory specific to that user providing easy recovery later.

 

SuperCycler at a glance
SuperCycler at a glance
Live Graphing Gives vivid feedback of the thermal activity. Enables the user to set the block to a specific temperature quickly without creating a thermal profle
Manual Control This function is useful for incubating reactions such as DNA digestion or ligation.
Oligo Calculator Its incorporated into the software to assist the operator in oligonucleotide design.
QuickStart Wizard Enables the user to configure easy to moderate complexity profiles in just moments.
USB Connectivity Front access USB host port enables file transfer between units using an ordinary USB memory stick. Also supports the use of a mouse.
User Accounts Enables easy separation and organization of user thermal run profiles. Many thousands of profiles may be stored in the large internal 256mb+ memory.
Pause The ‘Pause’ feature allows the user to pause the profile at any number of pre-programmed points while emitting an alert beep.
Long Range Enables the time of a particular cycling step to be automatically increased or decreased by a preset amount over a specified range of cycle repeats.
Touch Down/Up Enables the temperature of a step to be automatically increased or decreased by a preset amount over a range of successive cycle repeats
On Screen Help User manual is inbuilt into the software ensuring that help is never more than a click away.
Run Reporting Post run report is generated on run completion and may be saved to USB memory stick for inclusion into your run documentation.

 

Technical specifications
Technical specifications
Technology High performance active heating and cooling using quality peltier elements x 8and precision sensors x 4
Temperature range 4°C - 99°C
Temperature Accuracy ±0,25°C
Uniformity ±0,3°C
Temperature Resolution 0,1°C increments
Heating/Cooling rate 3°C / sec maximum (block)
Well Configuration 0.2 mL tubes or strip tubes with flat or domed caps; 96-well high-or low skirt plates with strip caps,adhesive seal
Condensation Control Automatic utilising applied pressure heated lid
Heated Lid Temperature Range 60°C - 115°C
Dimensions 180 x 285 x 190 mm (W x D x H)
Weight 5,5 kg
Electrical 100-240V, 50/60 Hz
Interface USB Port for Memory Stick, USB-moue or keyboard
Display 7-inch Widescreen Colour Touch Display
Funktionality Touch Down/Up, LongRange, Program Pauses, On-Screen Help, User accounts, Temperature Graphing, Profile Load and Saving, Manual Mode,
USB File Transfer, post run reporting, and more

 

Protein Electrophoresis Promotion

Get a box with 10 ready to use pre cast gels for free....

news/protein-electrophoresis-promotion/

New products coming soon

 

Nippon Genetics is proud to inform that Genostaff Co. Ltd. (Tokyo, Japan) started an exclusive agreement in order to market their products in Europe. One of their expertises is the supply of 1st strand cDNA kits from specific mouse organs as well as from mouse embryos (9.5 - 18.5 days). If you need more information, send us an email and we will come back to immediately.

Exhibitions

Come and see us......exhibitions/